Step By Step Guide To Solar Energy Installation
Nowadays people are conscious about the environment and find a way to save the environment. In Australia, Summer brings scorching heat and relentless sunshine the result is an increase the electricity bills because we use air conditioners to combat the sweltering temperature. But summer is an ideal time to harness the abundant solar energy and take a step towards a sunshine future. To reduce the electricity bill solar power panels installation are big help. Solar panels for your home is considered a valuable asset. This system uses the sun's power to generate electricity for homes, industries, factories, and whenever required electricity. Solar installation saves the electricity bill as well as good for the environment.
Planning To Solar Energy Installation
When you planning to power your home with solar energy follow the below steps.
Determine The Home Energy Consumption
Before installing solar energy first step is how much electricity is consumed at your place. The homeowner is aware of their electricity usage and considers low-cost and easy-to-implement efficiency measure solar choice. A home energy audit can help you understand where your home losing energy.
Plan To Install Solar System
Solar energy installation is a complex and costly investment. Check that your property is suitable for your solar power system and check the roof has enough space to install solar panels. Determine that sun heat is exposed properly when installing the solar panel. Looking for solar panel installers near me and determined that it affects your solar system while exposing the sun's rays. Sometimes solar installation requires permission, so ask for permission to avoid further trouble.
Install The Racking System
If everything is okay now start with install racking. Racking is fixed on your roof to hold your panel in place. Arrange the panel design on the ground to fit within the allotted space. Install rack system according to manufacturer instructions.
Install The Panel
Connect the solar panels to the racking system using an installation kit’s supplied clamps to hold them in place, and adjust each panel.
Heat Sink Install
It is important to install a heat sink which reduces the heat your panel generates and helps to increase energy efficiency. Heat sinks can be installed according to manufacturer instructions.
Install Charger Controller
The charger controller spends out electricity. Install a charger controller between your array panel where your solar battery will go so electricity can flow via the system and into your battery.
Install Solar Battery
Solar panels sometimes generate extra energy so for storing the electricity use the inverter. if you have multiple batteries connected to the wire. They connected with the solar battery charger as well as the EV home charger.
Install Power Converter
The power that comes out of your panel and batteries is Direct Current (DC), and your home power is AC. So use a power converter to convert the power before connection.
Add Energy Meter
An energy meter is not an essential thing. You can set up an energy meter to get to know how much electricity is generated and used.
Setup Electric Wire
Before using check the wire connection in your system. Ensure the system is grounded at the PV panel, and ensure the wire is connected properly or not.
Connect With Electric Panel
Once the setup is complete, the inspector approves your system setup, and you can wire the power inverter directly to the electric panel.
Conclusion
Solar power panel installation is not only cost effective but also benefits of environment. Solar energy installation is cost-saving and is considered an investment. With rising electricity prices and increasing energy demand, switching to solar power can protect you from fluctuating utility rates. You will enjoy significant long-term savings on your electricity bills.
